Ames Fire & Waterworks 4000B-FP Bronze Reduced Pressure Zone Assemblies with Gear Operated Slow Close Isolation Valves - Manual

RP/IS-A-4000B Installation, Maintenance, & Repair
Series 4000B/LF4000B
Reduced Pressure Zone Assemblies
Sizes: 1 ⁄
2
" – 2" (15 – 50mm)
4000B/LF4000B Size: 3 /
4
"
www.amesfirewater.com A Division of Watts Water Technologies, Inc.
Testing
For field testing procedure, refer to Ames installation sheets
IS-A-ATG-1 found on www.amesfirewater.com.
For other repair kits and service parts, refer to our Backflow
Prevention Products Repair Kits & Service Parts price list
PL-A-RP-BPD found on www.amesfirewater.com.
For technical assistance, contact your local Ames representative.
Local building or plumbing codes may require modifications to
the information provided. You are required to consult the local
building and plumbing codes prior to installation. If this informa-
tion is not consistent with local building or plumbing codes, the
local codes should be followed.
Need for Periodic Inspection/Maintenance: This product
must be tested periodically in compliance with local codes, but
at least once per year or more as service conditions warrant.
Corrosive water conditions, and/or unauthorized adjustments
or repair could render the product ineffective for the service in-
tended. Regular checking and cleaning of the product’s internal
components helps assure maximum life and proper product
function.
WARNING !
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information
can result in death, serious personal injury, property
damage, or damage to the equipment.
Keep this Manual for future reference.
NOTICE
Inquire with governing authorities for local installation
requirements