Baumer BA IRxx.DxxL - Manual (Page 3)

en_BA_IRxx .DxxL.docx 3/12 Baumer Electric AG
10.11.2014 14:03/simg V1.0 ANW_81146130 Frauenfeld, Switzerland
1 General information
1.1 Applicability
This document is applicable for all Baumer inductive distance measuring sensors (or analog inductive
sensors) with a teach-in:

IR08.DxxL

IR12.DxxL

IR18.DxxL
1.2 Concerning the contents of this document
This manual contains information about the installation and commissioning of Baumer analog inductive
sensors. It is a supplement to the mounting instructions supplied with each sensor.
1.3 Intended use
The Baumer analog inductive sensors are able to detect the position of a metallic object which is within the
measuring range of the sensor.
It was especially developed for easy handling, flexible use, and precise measurement.
1.4 Safety notes
NOTE
Provides helpful operating instructions or other general recommendations.
ATTENTION!
Indicates a possibly hazardous situation. If it is not avoided, minor or slight injuries
can occur or the device can be damaged.
Read these operating instructions carefully and follow the safety instructions!