Baumer N 150 - Manual

Baumer IVO GmbH & Co. KG 02.10 • 171.02.281/8
Dauchinger Strasse 58-62 • DE-78056 Villingen-Schwenningen Subject to modification
Phone +49 (0)7720 942-0 • Fax +49 (0)7720 942-900 in technic and design.
www.baumer.com • [email protected]
Operating instructions
Interface description
N 150 spindle position display (SPA)
Software 01
Version 1.50 and up
Content Page
1. General information 2
1.1. Safety precautions 2
1.2. SPA description and explanation 3
2. Terminal assignment 4
3. Interface 5
3.1. Interface data 5
3.2. Protocol 5
3.3. Checksum (Cyclic Redundancy Check) 5
3.4. Data transmission properties 6
3.5. Broadcast commands 6
3.6. Data saving 6
4. Command explanations 6
4.1. General information 6
4.2. Operating commands 6
4.3. Parameter commands 11
4.4. Identifier commands 15
4.5. Specific commands 17
5. Error warnings 19
5.1. CRC error 19
5.2. Format error 19
6. Overview on commands 19
7. Technical data 20
7.1. Dimensions 21
8. Part number 21