Baumer N 155 - Manual (Page 7)

N 155
www.baumer.com 7
Example 2: Read target of a specific profile (profile number = 17; target = 12.50)
SOH Adr Cmd Profil-Nr. = 17 EOT CRC
Send
01h 20h 53h 31h 37h 04h 16h
SOH Adr Cmd Profil-Nr. = 17 target = 12.50 EOT CRC
Response
01h 20h 53h 31h 37h 30h 30h 31h 32h 35h 30h 04h BCh
Example 3: Write target of specific profile (profile number = 17; target = -12.50)
s
SOH Adr Cmd Profil-Nr. = 17 target = -12.50 EOT CRC
Send
01h 20h 53h 31h 37h 2Dh 30h 31h 32h 35h 30h 04h FBh
SOH Adr Cmd Profil-Nr. = 17 target = -12.50 EOT CRC
Response
01h 20h 53h 31h 37h 2Dh 30h 31h 32h 35h 30h 04h FBh
4.2.3 Read / write profile number „V“ (56h)
This command is for reading the number of the presently active profile respectively for altering the profile.
Example 1: Read active profile (active profile number = 38)
SOH Adr Cmd EOT CRC
Send
01h 20h 56h 04h 20h
SOH Adr Cmd Profile no. = 38 EOT CRC
Response
01h 20h 56h 33h 38h 04h 28h
Response after reset upon clearing all profiles:
SOH Adr Cmd Profile no. = FF EOT CRC
Response
01h 20h 56h 3Fh 3Fh 04h 16h
Example 2: Send new profile (New profile number = 17)
SOH Adr Cmd Profile no. = 17 EOT CRC
Send
01h 20h 56h 31h 37h 04h 3E
SOH Adr Cmd Profile no. = 17 EOT CRC
Response
01h 20h 56h 31h 37h 04h 3E
Example 3: Send new profile by broadcast command to each N 155 (Adr = 99 (83h); new profile number = 17)
SOH Adr Cmd Profile no. = 17 EOT CRC
Send
01h 83h 56h 31h 37h 04h 04
Response No confirmation
To check whether the new profile has been entered by all N 155 in the network, check command „C“ (43h) can
be applied.
4.2.4 Check position „C“ (43h)
This command is providing the alignment status of target versus current value. If current value is in coincidence
with target the response will be „o“ (6Fh) for OK together with the current profile number. If the running value is
beyond the target, „x“ (78H) followed by the current profile number will be replied.
Example: (active profile number = 05)
SOH Adr Cmd EOT CRC
Send
01h 20h 43h 04h 0Ah
Response if current value = target:
SOH Adr Cmd Status Profile no. = 05 EOT CRC
Response
01h 20h 43h 6Fh 30h 35h 04h A5h
Response if current value ≠ target:
SOH Adr Cmd Status Profile no. = 05 EOT CRC
Response
01h 20h 43h 78h 30h 35h 04h 1D