Baumer N 142 - Manual (Page 31)

N 142
www.baumer.com 31
7. Technical data
Technical data – electrical ratings
Supply voltage
24 VDC ±10 %
Current consumption ≤30 mA
Display LCD, 7-segment display, 2-lines, backlit
Measuring rinciple Absolute multiturn sensing
Measuring range -999,99...+9999,99 mm
-99.999...+999.999 inch
Steps per turn 2304
Number of turns 4096 / 12 bit
Spindle pitch ≤23 mm
Interface RS485 (ASCII-protocol)
Data memory Parameter buffer: EEPROM
Current value buffer: >10 years by
integrated 3 V lithium battery
Programmable parameters Display position horizontal/vertical
Measuring unit mm/inch
Counting direction
Spindle pitch
Spindle tolerances
Positioning direction
Direction arrows
Tolerance window
Rounding up/down
Motive positioning Two softkeys for format alignment
Direct motor connection to N 142 by motor cable
Standard DIN EN 61010-1 Protection II
Overvoltage category II
Pollution degree 2
Emitted interference DIN EN 61000-6-3
Interference immunity DIN EN 61000-6-2
Approvals UL/cUL
Technical data – mechanical design
Hollow shaft
ø20 mm, ø25 mm
Operating speed ≤600 U/min (short-term)
Protection DIN EN 60529 IP 65 (housing), IP 40 (connector)
Operating temperature -10...+50 °C
Storage temperature -20...+70 °C
Relative humidity 80 % not condensing
Torque support Torque pin provided at housing
E-connections - Cable output (30 cm( with male and mating connector M16, 5-pins
- Motor cable with female connector M16, 12-pins
User surface / keypad Membrane with two softkeys
Housing Surface-mount with hollow shaft
Dimensions W x H x L 56 x 100 x 62.5 mm
Mounting Surface-mount with hollow shaft
Weight approx. 200 g
Material Polycarbonate black, UL 94V-0