Baumer G1-G2-G0-GE-GB-GXxxx - Manual (Page 18)

Manual_DeviceNet_BIDE_EN.docx 18/18 Baumer IVO GmbH & Co. KG
22.11.12 Villingen-Schwenningen, Germany
10.3 Display elements (status display)
A DUO LED (green/red) is located in the bus cover which works in accordance with DeviceNet specification in
the combined module/network status and supplies information about the status of the encoder and the
network.
LED status Status Description
Off Not connected
No power supply
- Dupl. MAC-ID Check not finished.
- Power supply not connected
Green flashing Device active and online
No connections set up The device is working under normal conditions and
is online, but no connection has been set up.
- The encoder has not yet been configured by the
master
- Configuration not complete or faulty
Green Device active and online
Connections are set up The device is working under normal conditions and
is online, connections in "set up" status“
Red Critical device error critical
communication error The device is an irreparable error status
- No network communication possible
- User address has been assigned twice (MAC-ID)
Red flashing Repairable error I/O connections are in time-out status