Baumer BA Series09 US RS232 - Manual (Page 3)

Bedienungsanleitung_Series09-US_RS232_V1_e.doc 3/11 Baumer Electric AG
26.03.2013 14:43:00/tof Frauenfeld, Switzerland
2.3 Beam columnator
Never attach a beam columnator to sensors designed for operation without beam columnator only.
Sensors with beam columnator feature extended functions (sensitivity adjustment) which are not available for
sensors without beam columnator.
Disassembling the beam columnator
In order to prevent damage to either sensor or beam columnator always turn the beam columnator first (¼
turn) before pulling it off. Never attempt to snap the beam columnator from the sensor without turning it first.
2.4 Positioning above containers (Sensors with beam columnator D1)
When measuring fill levels in micro titration plates or in similarly small containers it is imperative to align the
sensors as accurately as possible above the openings. With reference to applicable mounting distances
following reference values should be applied: