Cooling system — drain, flush and refill, Selection of coolant – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 439

properly, the engine coolant (antifreeze) will begin to

drain from the coolant recovery bottle. DO NOT RE-

MOVE THE COOLANT PRESSURE CAP WHEN THE

COOLING SYSTEM IS HOT.
Cooling System — Drain, Flush And Refill
If the engine coolant (antifreeze) is dirty or contains

visible sediment, have an authorized dealer clean and

flush with OAT coolant (antifreeze) (conforming to MS-

12106).
Refer to the “Maintenance Schedule” for the proper

maintenance intervals.

NOTE:

Some vehicles require special tools to add coolant

properly. Failure to fill these systems properly could lead

to severe internal engine damage. If any coolant is

needed to be added to the system please contact your

local authorized dealer.
Selection Of Coolant
Refer to “Fluids, Lubricants, and Genuine Parts” in

“Maintaining Your Vehicle” for further information.

438 MAINTAINING YOUR VEHICLE