beautypg.com

Seek buttons, Scan button, Info button – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 269: Rw/ff

background image

• Dense tree coverage may interrupt reception in the

form of short audio mutes.

• Driving under wide bridges or along tall buildings can

cause intermittent reception.

• Placing objects over or too close to the antenna can

cause signal blockage.

Operating Instructions — Uconnect® Multimedia
(Satellite) Mode

NOTE:

The ignition switch must be in the ON/RUN or

ACC position to operate the radio.
SEEK Buttons
Press and release the SEEK buttons to search for the next

channel in Satellite mode. Press the right switch to seek

up and the left switch to seek down. The radio will

remain tuned to the new channel until you make another

selection. Holding either button will bypass channels

without stopping until you release it.

SCAN Button
Pressing the SCAN button causes the tuner to search for

the next channel, pausing for eight seconds before con-

tinuing to the next. To stop the search, press the SCAN

button a second time.
INFO Button
Pressing the INFO button will cycle the display informa-

tion between Artist, Song Title, and Composer (if avail-

able). Also, pressing and holding the INFO button for an

additional three seconds will make the radio display the

Song Title all of the time (press and hold again to return

to normal display).
RW/FF
Pressing the RW (Rewind) or FF (Fast Forward) buttons

causes the tuner to search for the next channel in the

direction of the arrows.

268 UNDERSTANDING YOUR INSTRUMENT PANEL