beautypg.com

D) drive vehicle, E) after driving – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 404

background image

CAUTION!

The metal end fitting from Power Plug (8) may get

hot after use, so it should be handled carefully.

Failure to reinstall the cap on the fitting at the end

of the Sealant Hose (6) can result in sealant con-
tacting your skin, clothing, and the vehicle’s inte-
rior. It can also result in sealant contacting internal
TIREFIT kit components which may cause perma-
nent damage to the kit.

(D) Drive Vehicle:
Immediately after injecting sealant and inflating the tire,

drive the vehicle 5 miles (8 km) or 10 minutes to ensure

distribution of the TIREFIT Sealant within the tire. Do not

exceed 55 mph (90 km/h).

WARNING!

TIREFIT is not a permanent flat tire repair. Have the
tire inspected and repaired or replaced after using
TIREFIT. Do not exceed 55 mph (90 km/h) until the
tire is repaired or replaced. Failure to follow this
warning can result in injuries that are serious or fatal
to you, your passengers, and others around you.

(E) After Driving:
Pull over to a safe location. Refer to “Whenever You Stop

to Use TIREFIT” before continuing.
1. Push in the Mode Select Knob (5) and turn to the Air

Mode position.

2. Uncoil the power plug and insert the plug into the

vehicle’s 12 Volt power outlet.

6

WHAT TO DO IN EMERGENCIES 403