beautypg.com

Enabling/disabling parksense, Service the parksense® rear park assist system, Service the parksense® rear park assist – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 183: System

background image

Enabling/Disabling ParkSense®

ParkSense® can be enabled and disabled through the

Customer-Programmable Features section of the EVIC.

The available choices are: OFF, Sound Only, or Sound and

Display. Refer to “Electronic Vehicle Information Center

(EVIC)/Personal Settings (Customer-Programmable Fea-

tures)” in “Understanding Your Instrument Panel” for

further information.
When ParkSense® is disabled, the instrument cluster will

display the “PARK ASSIST SYSTEM OFF” message for

approximately five seconds. Refer to “Electronic Vehicle

Information Center (EVIC)” in “Understanding Your

Instrument Panel” for further information. When the

shift lever is moved to REVERSE and the system is

disabled, the EVIC will display the “PARK ASSIST SYS-

TEM OFF” message for as long as the vehicle is in

REVERSE.

Service The ParkSense® Rear Park Assist
System

During vehicle start up, when the ParkSense® Rear Park

Assist System has detected a faulted condition, the

instrument cluster will actuate a single chime, once per

ignition cycle, and it will display the ЉSERVICE PARK

ASSIST SYSTEMЉ message for five seconds. Refer to

“Electronic Vehicle Information Center (EVIC)” in “Un-

derstanding Your Instrument Panel” for further informa-

tion. When the shift lever is moved to REVERSE and the

system has detected a faulted condition, the EVIC will

display the ЉSERVICE PARK ASSIST SYSTEMЉ or ЉWIPE

OFF REAR SENSORSЉ message for as long as the vehicle

is in REVERSE. Under this condition, ParkSense® will

not operate.
If ЉWIPE OFF REAR SENSORSЉappears in the Electronic

Vehicle Information Center (EVIC) make sure the rear

fascia/bumper is clean and clear of snow, ice, mud, dirt

182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE