NISSAN 2010 Maxima - Navigation System Owner's Manual - Manual (Page 27)

Black plate (28,1)
Model "08NJ-N" EDITED: 2010/ 5/ 14
4. Adjust the voice guidance volume by using
the center dial or main directional buttons.
Other settings
Voice guidance volume can also be adjusted
using the following procedure.
1) Push .
2) Highlight [Volume & Beeps] and push
.
3) Highlight [Guidance Volume] and push
.
4) Adjust the voice guidance volume by using
the center dial or main directional buttons.
INFO:
The volume can also be adjusted by turning the
audio system volume control knob or pushing +/
− on the steering wheel switch while voice
guidance is being announced.
“STEERING WHEEL SWITCH” (page 2-
3)
NISSAN Voice Recognition allows hands-free
operation of the navigation system and other
systems equipped on this vehicle, such as the
phone, vehicle information and audio. NISSAN
Voice Recognition can be used in one of two
selectable modes, Standard Mode or Alternate
Command Mode.
In Standard Mode, the commands that are
available are always shown on the display and
announced by the system. To perform opera-
tions, simply follow the prompts given by the
system.
For advanced operation, change to Alternate
Command Mode. When this mode is active, an
expanded list of commands can be spoken after
pushing
> on the steering wheel
switch and the voice command menu prompts
are turned off. Note that in this mode the
recognition success rate may be affected
because the number of available commands
and ways of speaking each command are
increased. Otherwise, it is recommended that
Alternate Command Mode be turned to OFF
and Standard Mode be used for the best
recognition performance.
For U.S. customers, Standard Mode is selected
by default. For Canadian customers, Alternate
Command Mode is the default mode.
Otherwise, it is recommended that Alternate
Command Mode be turned to OFF and Stan-
NISSAN VOICE RECOGNITION
2-20 Getting started