NISSAN 2010 Maxima - Navigation System Owner's Manual User Manual
Page 173
Black plate (184,1)
Model "08NJ-N" EDITED: 2010/ 5/ 14
Useful tips for correct operation
It is possible to display useful speaking informa-
tion that may help the system to accept a voice
command correctly.
1. Highlight [Help on Speaking] and push
2. To confirm the page, scroll the screen using
the up and down switches of the main
directional buttons or the center dial.
USING THE SYSTEM
Initialization
When the ignition switch is pushed to the ON > is pushed before the initializa- tion completes, the display will show the BEFORE STARTING To get the best recognition performance from . The interior of the vehicle should be as quiet as possible. Close the windows to eliminate . Wait until the tone sounds before speaking a command. . Speak in a natural conversational voice without pausing between words. . If the air conditioner is set to “Auto”, the fan speed is automatically lowered so that voice GIVING VOICE COMMANDS 1. Push > located on the steering wheel switch. 2. A list of commands appears on the screen, and the system provides the voice menu 3. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak a command. 4. Continue to follow the voice menu prompts and speak after the tone sounds until the Operating tips . Speak a command after the tone. shown on the display and spoken through 9-4 Voice recognition
position, Voice Recognition is initialized, which
may take up to one minute. When completed,
the system is ready to accept voice commands.
If
message: “System not ready”.
Voice Recognition, observe the following items.
the surrounding noises (traffic noise and
vibration sounds, etc.), which may prevent
the system from correctly recognizing the
voice commands.
commands can be recognized more easily.
prompt “Would you like to access Phone,
Navigation, Information, Audio or Help?”.
preferred operation is completed.
. Commands that are available are always
voice menu prompts. Commands other than