Canon HDMI SX800 - Manual (Page 95)

95
Setting the Image Quality
Setting Up Functions fr
om
Menu
s
Adjusting Fine Color Adjustment (6-axis
color adjust) (SX80)
[Advanced adjustment] - [6-axis color adjust]
You can make fine color adjustment with
RGB (red, green, blue) and CMY (cyan,
magenta, yellow). For the details of 6-axis
color adjust, refer to the page
143 .
When you have completed the adjust-
ment, press the MENU button.
• [Off] is the factory default.
• The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Reducing the Lamp Brightness
[Lamp mode]
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
You can enable or disable this mode also
with the LAMP button on the remote con-
trol.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The setting you have made is stored as
a setting value of input signals being
projected in an image mode.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Off Disables the 6-axis color adjustment.
If you select [Adjust], the previous set-
ting of 6-axis color adjustment
becomes active again.
Adjust Enables the 6-axis color adjustment.
Use [ ] / [ ] to select [ Hue] or [
Saturation], then adjust them with [<] /
[>].
Reset Returns any adjustment values to zero.
Advanced adjustment
Image adjustment
6-axis color adjust
<
<
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Normal Projects an image at the normal bright-
ness level.
Quiet Reduces the lamp brightness and cool-
ing fan noise.
Lamp mode
Image adjustment