Canon Elura 100 - Manual (Page 97)

97
Print
ing
E
Printing Printing Still Images
Connecting the Printer to the Camcorder
1. Turn off the camcorder and insert a memory card that contains still
images.
2. Turn on the printer.
3. Set the camcorder to mode.
4. Connect the camcorder to the printer using the USB cable.
• “ ” appears and changes to “ ”. Does not appear with movies, or still images
that cannot be played back with the camcorder.
• The (print/share) button lights up and the current print setting will be displayed
for approx. 6 seconds.
If “ ” continues to flash (for more than 1 minute) or if “ ” does not appear, the
camcorder is not correctly connected to the printer. In such case, disconnect the
cable from camcorder and printer, turn off camcorder and printer, turn both back
on and reconnect the camcorder to the printer.
 “ ” will appear for images that cannot be printed.
 We recommend powering the camcorder from a household power source.
 Refer also to the instruction manual of the printer.
The camcorder can be connected to any PictBridge compatible
printer. You can use the print order settings for direct printing of
still images recorded on the memory card (
102).
Canon printers: SELPHY CP, SELPHY DS and PIXMA printers.
PictBridge
compatible printer
Open the LCD panel
USB Cable (supplied)