Canon ImageCLASS MF8180c - Manual (Page 9)

- 9 -
NOTE
● If you use LETTER sized paper, you do not need to
follow this step, as it is already set as a factory default.
Proceed to the next step.
3 Pinch and slide the blue rear paper end guide
to match the size of paper.
Set this part
to the position
of paper size
4 Pinch and slide the blue side paper end
guides by both hands to match the size of
paper.
Paper limit
mark
Paper limit
mark
5 Load the paper with the print side facing
down and the top of the paper to the front of
the cassette. Make sure the stack height does
not exceed the limit mark.
Hook
Hook
6 Press down the paper stack to the bottom
and make sure the side edges of the stack sit
below the hooks.
7 Insert the paper cassette back into the
machine as far as it will go.
NOTE
● If you do not completely insert the cassette into the
machine, paper jams may occur.
● Make sure the correct paper size is specified in the
machine. For details, see Chapter 2,“Paper Handling,”
in the Basic Guide.