Canon ImageCLASS MF8180c - Manual (Page 19)

- 19 -
Connecting the Machine to a Network.
Connect a Category 5 rated (Cat 5) twisted-pair LAN cable to
the 10Base-T/100Base-TX port on the back of the machine.
Connect the other end of the cable to a network router or a
hub.
Checking Network Settings.
1 Press [Menu]
➝
or (arrow keys) to select <6.NETWORK SETTINGS>
on the LCD
➝ press [Set].
2 Press or (arrow keys) to select <2.VIEW IP ADDRESS>
➝ press [Set].
3 Press or (arrow keys) to select the desired setting
➝ press [Set].
4 Press [Stop/Reset] to return to the standby display.
Installing Driver Software.
NOTE
● For Windows 2000/XP/Server 2003, log on as Administrator to install the software.
● The screenshots below are from Windows XP. However, the installation procedure is essentially the same for other
versions of Windows.
1 Turn on your computer.
2 Quit any open applications, including virus checking
software.
3 Insert the CD-ROM into your CD-ROM drive.
4 Click [Easy Installation].
NOTE
● If the [MF8100 Series CD-ROM Setup] screen is not displayed, on the
Windows desktop, click [Start]
➝ [My Computer]. Open the CD-ROM
icon, then double-click [Minst (Minst.exe)].
5 Click [Next] under [Connect Printer to Computer via Network ].