beautypg.com

Memory function (if equipped), Programming a memory position, Recalling a memory position – FORD 2014 Explorer v.3 User Manual

Page 164: Recalling memory positions with the remote control, Memory function, Seats 163

background image

MEMORY FUNCTION (IF EQUIPPED)

This memory control, located on the
driver door, allows automatic
positioning of the driver seat
and power mirrors to three
programmable positions. You may
also have this feature for the steering
column and power adjustable foot
pedals.

Programming a memory position

Note: You can program a memory position at any time.
• To program position 1, move the memory features to the desired

positions using the associated controls. Press and hold button 1 for at
least two seconds. A chime will sound confirming that a memory
position has been set.

• To program position 2 and 3, repeat the previous procedure using the

respective buttons.

Recalling a memory position

You can recall a programmed memory position:
• In any gearshift position if the ignition is not on.
• Only in park (P) or neutral (N) if the ignition is on.
Press the desired memory control to recall a memory position.

Recalling memory positions with the remote control

You can recall memory positions when you press unlock on your remote
control (if the transmitter is programmed to a memory position) or,
when you enter a valid personal entry code that is programmed to a
memory position. If the easy entry feature is enabled, the seat will first
move to the easy entry position. The seat will move to the final position
when the key is in the ignition or when the push button start system (if
equipped) is put in accessory mode or started.

To program the memory feature to a remote control, see the Keys and
Remote Control
chapter.

Seats

163

2014 Explorer (exp)
Owners Guide gf, 3rd Printing, September 2013
USA
(fus)