BMW 760i Sedan 2004 User Manual

Page 85

Priority 1:

These status messages and malfunction
reports are signaled by a gong. Simulta-
neous defects will be displayed consecu-
tively. These messages cannot be deleted,
and they remain in the display until the
problem is corrected. Supplementary infor-
mation is also shown on the Control Dis-
play, refer to Automatic display on the Con-
trol Display.

Priority 2:

These status messages and malfunction
reports appear in the Info Display for
approx. 20 seconds.

Briefly press the CHECK button on the turn
signal indicator lever to cancel the mes-
sage in the display, if allowed by priority
rating.

Requesting stored messages using the
Control Center see there.

Check Control symbol and messages
on the Control Display

Depending on the status of the monitored
systems, the Check Control symbol

displayed in different colors.

Yellow or red

Faults are present in the monitored sys-
tems. Depending upon how serious the
problem is, a supplementary message may
also appear on the Control Display.

Requesting stored messages using the
Control Center see there.

The symbol in the status line also indi-
cates the status of the Service Interval

Display, refer to page

Automatic display on the Control
Display

These supplementary messages are
intended to assist you in assessing the
severity of malfunctions; they provide you
with the information you need to decide on
the best way to respond.

Select

and confirm to switch off the dis-

play.

Requesting stored messages using
the Control Center

Select "Car data"

Select

and confirm

Select "Check" and confirm

The stored status reports appear in the
display. Select the desired report and
confirm.