Maximum cooling: press, Off manually, And the rear air conditioner – BMW 760i Sedan 2004 User Manual

Page 106: A congenial climate

A congenial climate

104

The air conditioner comes on automatically
when you select the AUTO program.

Temperature adjustment

You can turn to select the
desired temperatures for the
driver and passenger sides.
Your settings appear on the
Control Display's status line.

The figures in the display provide a general
indication of interior temperature. When
you start the vehicle, this system ensures
that the selected temperature is achieved
as quickly as possible. It then maintains
this temperature, regardless of the season.

Defrosting windows and removing
condensation

This program quickly removes
ice and condensation from the
windshield and door windows.

Adjusting air supply manually

You can adjust the air supply by
turning. The automatic air sup-
ply control is operational when-
ever you see your selection
represented by a bar on the

Control Display's status line. The automatic
air distribution remains in operation as
before. You can reactivate the automatic
air supply mode with the AUTO button.

Switching air conditioner mode on
and off manually

The air conditioner cools and
dehumidifies the incoming air
before also reheating it as

required, according to temperature setting.
Depending on the weather, the windshield
may fog over briefly when the engine is
started.

The air conditioner comes on automatically
when you select the AUTO program.

Maximum cooling

This program quickly provides
maximum cooling.

The temperature display reverts
to 607/166 while the system

switches to the recirculated-air mode and
starts to provide maximum air supply
through the vent outlets only. For this rea-
son you should ensure that these outlets
are open before selecting this program.

Outside air/AUC Automatic
recirculated-air control/
recirculated air

You can respond to unpleasant
odors or pollutants in the imme-
diate environment by tempo-

rarily suspending the supply of outside air.
The system then recirculates the air cur-
rently within the vehicle. AUC executes this
function automatically.

Press the button repeatedly to run through
the following control sequence:

Indicator lamps off: outside air flows
into the vehicle

Left indicator lamp on, AUC mode: the
system detects pollutants in the outside
air and responds by blocking the supply
of outside air when required. The sys-
tem then recirculates the air currently
within the vehicle.
Depending upon air quality, in the auto-
matic mode the system may start to
alternate between its outside-air and
recirculated-air modes

Right indicator lamp on, recirculated-
air mode: the supply of outside air into
the vehicle is permanently blocked.
The system then recirculates the air
currently within the vehicle.

If condensation starts to form on the
inside window surfaces during opera-

tion in the recirculated-air mode, you
should switch it off while also increasing air
supply as required.