Dynalco SWTD-1000 Speed Switch/Transmitter - Manual (Page 13)

Operating Instructions SWTD-1000 DYNALCO
11 //
7. Hardware Configuration
7.1 Analog Sensor Input (Sign)
Jumper position J1: Sensor type J2: Adaptive trigger level range
2 wire sensors
(with 820Ohm Pull Up resistance)
28mV to 6.5V (>20mV
rms
)
3 wire and electromagnetic sensors
(factory setting) 250mV to 6.5V (>500mVpp)
[factory setting]
7.2 Digital Sensor Input (IQ)
No hardware configuration possible or necessary.
J2
J1