Dynalco UM-600 Universal Monitor - Manual (Page 16)

15
Downloading logged values to PC:
The hardware connection from the UM-600 Monitor to a PC is via a USB cable assembly,
Dynalco p/n 270A-13020. The 6 ft cable length allows easy connection via a 4 pin Phoenix
plug to the lower connector (terminals 5, 6, 7, 8) on the back of the UM-600 Monitor. When
initially plugging the download cable into the PC’s USB port, the new device should be
recognized and the driver installed automatically.
Please call (954) 739-4300 if the driver is not installed properly or assistance is required.
The Dynalco host software “LogReader” is available as a free download from our website:
www.dynalco.com/downloads
There are (2) versions available:
LogReader Ver. 1
Use for Version 1 UM-600
LogReader ver. 2
Use for Version 2 UM-600
Following installation, you may click on the icon to open the application. This software will
allow date selectable log values to be downloaded to an excel spread sheet on the PC.