Description of collar / receiver parts – Dogtra 300M Series User Manual
Page 9
14
BUTTON FUNCTIONS
When either the orange or gray stimulation
button is pressed and the toggle is set on “Nick”,
the receiver emits a single rapid pulse of
electrical stimulation.
When you press either the orange or gray
stimulation button and the toggle is set on
“Constant”, the receiver emits a continuous
stimulation as long as the button is pushed, for
up to 12 seconds to the corresponding collar. If
the button is not released after 12 seconds, the
stimulation will automatically turn off as a
safety feature. The collar will be ready to be
reactivated once the button has been released.
“Pager” Button
The “Pager” buttons are located on the face
of the transmitter. The orange button
corresponds with the orange receiver/collar and
the gray with the black receiver/collar. Pressing
it will give non-stimulating vibration as long as
the button is depressed, for up to 12 seconds.
15
DESCRIPTION OF COLLAR / RECEIVER PARTS
DESCRIPTION OF
COLLAR / RECEIVER PARTS
On/Off Magnetic Switch
(Red Dot)
Contact Points
Indicator Light
(LED Window)
Battery Charging
Receptacle and Cover
Collar strap