Dogtra 300M Series - Manual (Page 10)

16
DESCRIPTION OF COLLAR / RECEIVER PARTS
Receiver On/Off Magnetic Switch (Red Dot)
To activate the receiver/collar, place the red
dot on the back of the transmitter to the red dot
on the collar/receiver. Hold the two red dots
together for a moment until the LED light on the
receiver/collar comes on.
To deactivate the unit, repeat the same
procedure holding the two red dots together
momentarily. The LED light will turn red for a
brief moment indicating that the collar/receiver
is now shut off.
Receiver Indicator Light (LED)
Located on the front of the receiver/collar,
the indicator light comes on and blinks once
every 4 seconds after the collar has been turned
on. The color of the LED indicates the battery
life of the receiver.
(Green = full charge, Amber = medium
charge, Red = needs charge)
When the “Constant” button on the
transmitter is pushed, the collar indicator light
will glow steadily (either green, amber, or red
based on the remaining battery life), as long as
you hold the button down, for up to 12 seconds.
When the “Nick” button is pushed, the light
comes on for a fraction of a second.
17
DESCRIPTION OF COLLAR / RECEIVER PARTS