GE dect 6.0 - Manual (Page 8)

Getting started
4
6. Turn the set over and place the handset on the cradle. Plug one end
of the telephone line cord into the jack on the back of the telephone
base and the other end into a modular jack.
7. Plug the smaller end of the power adapter into the jack on the back
of the telephone base and the larger end into an electrical outlet
not controlled by a wall switch.
DSL filter (not included) is
required if you have DSL
high speed Internet service.
Route the cord through
the tabbed slot.
5. Replace the convertible base mount by aligning the small tabs to
the slots in the middle of the telephone base and the larger tabs in
the slots near the top as shown.
DESK DESK
WALL WALL
WALL WALL
THIS END UP
FOR WALL USE
THIS END UP
FOR DESK USE