GE dect 6.0 - Manual (Page 10)

Getting started
6
Wall mount installation
1. Make sure the telephone line cord is unplugged from the modular
jack and the power adapter cord is unplugged from the electrical
outlet before installation.
2. Rotate the wall mounting tab until the engraved text WALL is
correctly oriented. You can use a coin or a small flat tool if needed.
3. Turn the telephone base over and position it with the power jack
and telephone line jack facing towards you. Press on the convertible
base mount indicated by arrows below to remove it from the
telephone base.
WALL
WALL
WALL WALL
THIS END UP
FOR WALL USE
THIS END UP
FOR DESK USE