Canon PowerShot S95 - Manual (Page 44)

44
Switching the Display
You can change the screen display using the l button. Refer to p. 178
for details on information that appears on the screen.
Shooting
Playback
Screen Display in Dark Shooting Conditions
The display automatically brightens when shooting in dark conditions, allowing you
to check the composition (Night Display function). However, the brightness of the
image on the screen, and the brightness of the actual image recorded may be
different. Screen noise may appear and the movement of the subject may appear
somewhat jagged on the screen. This has no effect on the recorded image.
Overexposure Warning during Playback
In “Detailed Information Display”, overexposed areas of the image flash on
the screen.
Screen Display
Display 1 Display 2
[Focus Check
Display (p. 126)
Detailed Information
Display
No Information
Display
Simple Information
Display
You can also switch the display by pressing the l button while the
image displays right after shooting. However, Simple Information Display
is not available. You can change the display that appears first by pressing
the
n button, then choosing [Review info] in the 4 tab (p. 164).
COP
Y