Canon PowerShot S95 - Manual (Page 165)

Changing Shooting Function Settings
165
Changing the IS-Mode Settings
● Choose [IS Mode], then press the qr
buttons to choose an option.
If you press the shutter button halfway and return to the shooting screen
from the custom display settings screen, the settings will not be saved.
• Gray items can also be set, however, they may not appear depending on
the Shooting mode.
• Grid lines will not be recorded on the image.
Continuous
Image stabilization is always on.
You can confirm the effects
directly on the display, which
makes it easier to check the
composition or focus. It not only
reduces angular blur, but also
reduces lateral shift blur (hybrid
IS) common to macro
photography.
Shoot Only
Image stabilization is only active
at the moment of shooting.
Panning
Image stabilization only counters
up and down motion. This option
is recommended for shooting
objects moving horizontally.
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
COP
Y