Canon PowerShot S95 - Manual (Page 100)

100
You can manually set the shutter speed and aperture to shoot images.
D stands for “Manual”.
Set the mode dial to D.
Make the setting.
● Turn the Ê dial to set the shutter speed, or
turn the Ï ring to set the aperture value.
X The set exposure level appears on the
indicator. You can check the difference
against the standard exposure level.
X When the difference is more than ±2 stops,
the set exposure level appears in orange.
When you press the shutter button halfway,
“-2” or “+2” appears in orange.
Setting the Shutter Speed and Aperture Value
Shutter Speed
Aperture Value
Standard
Exposure Level
Exposure Level
Indicator
Exposure Level
• The standard exposure is calculated according to the metering method
chosen (p. 95).
• If you use the zoom after making settings or changing the composition,
the exposure level may change.
• Depending on the shutter speed or aperture value set, the screen
brightness may change. If the flash mode is set to
h, the screen
brightness will not change.
• If you press the o button while holding down the shutter button halfway,
the shutter speed and aperture value will automatically adjust to obtain
the correct exposure (the correct exposure may not be obtained
depending on the settings).
COP
Y