Canon PowerShot S95 - Manual (Page 111)

Checking for Shut Eyes
111
Specify the range of colors to be
swapped.
● Press the op buttons or turn the Ê dial
to adjust the range of colors to be
changed.
● Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
● Press the l button to restore the
shooting screen.
When the camera detects the possibility that people have their eyes shut,
appears.
Choose [Blink Detection].
● Press the n button, then choose
[Blink Detection] in the 4 tab. Press the
qr buttons to choose [On].
Shoot.
X When a person with shut eyes is detected,
a frame and
appear.
• Using the flash may cause unexpected results in this mode.
• Under some conditions, the image may appear coarse.
Checking for Shut Eyes
• In or mode, when the number of shots is set to two or more, this
function is only available for the last image shot.
• In and mode, this function is only available for the last image
shot.
• Not available in W, , or mode.
COP
Y