Canon PIXMA MX340 - Manual (Page 47)

1 A
-
1
10 Set Up a Wireless Connection
Read this section only when setting up
a wireless connection by using the WCN
(Windows Connect Now) function of
Windows 7/Windows Vista.
If not using WCN, the following procedure is
not necessary.
Proceed with the setup according to your
operating system.
The machine supports "WCN-UFD". •
Before setting up by using the WCN,
establish wireless communication between
the computer and the access point.
Canon assumes no responsibility for any
damage or loss of data stored on your
USB flash drive regardless of the cause
even within the warranty period.
If your USB flash drive cannot be attached
to the Direct Print Port of the machine, a
commercial extension cord (for USB flash
drives) may be required.
Operation may not be guaranteed
depending on your USB flash drive.
USB flash drives with security enabled
may not be used.
•
•
•
•
•
From the Start
menu of the
Windows side, click
Network.
The Network folder
opens.
Click Add a wireless
device on the menu.
The Add a wireless
device to the network
screen will be displayed.
Click I want to add a wireless
device or computer that is not on
the list, using a USB flash drive.
W
ir
el
es
s
S
et
up
U
si
ng
W
C
N
(
W
in
do
w
s
C
on
ne
ct
N
ow
) 1
Windows Vista
Windows 7 - (P.47)
2 3
Windows 7
Windows
Vista
Go to - on
page 47.
Go to - .