Canon PIXMA MX340 - Manual (Page 45)

7 6
10 Set Up a Wireless Connection
Select Push button method, then press the OK button. Select WPS, then press the OK button.
To use the PIN code method for setup, select PIN code method in , then press the OK button. Follow the on-
screen instructions to operate the machine and access point. When the screen in appears, press the OK button.
When the screen in appears, press the COPY button to return to the copy standby screen.
A timeout error occurs if setup is not completed within 10 minutes. If the timeout error screen appears, press the
OK button, then perform the setup again and set the new PIN code displayed on the screen to the access point. If
another error appears, refer to the printed manual: Network Setup Troubleshooting.
•
The WPS screen is displayed. The When the access point is ready, press [OK] of the device. screen is displayed.