Canon PIXMA MX340 - Manual (Page 12)

4 3
E C D
1 2
A B
10
4 Turn the Power On
Use the [ or ] button (C) on the Operation Panel
to select the language for the LCD (Liquid Crystal
Display) (D), then press the OK button.
Make sure that the above screen is displayed and
go to the next step.
If an unintended language is displayed on the
LCD, press the Back button (E) to return to the
Language selection screen.
•
Turning the power off □
When removing the power plug, make
sure that the lamp of the ON button
is not lit before removing the plug.
Removing the power plug while the lamp
of the ON button lights up or flashes may
cause drying and clogging of the FINE
Cartridges, resulting in poor printing.
•
Be sure to follow the procedure below.
Operating noise may continue for up to 25
seconds until the machine turns off.
1. Press the ON button (A) to turn off the
machine.
2. Make sure that the lamp (B) of the ON
button is not lit.
If your machine is used as fax
Removing the power plug deletes all faxes
stored in memory. Send or print faxes as
necessary before removing the power
plug.
•