Nikon F100 - Manual (Page 31)

61 60
Multiple Exposure
Exposure
2 Rotate the Main-Command Dial while pressing the
˚
button to set the desired exposure
compensation.
• Exposure compensation is necessary depending on the number of
exposures in multiple exposure since more than one image is exposed in
the same frame.
• Standard compensation value:
Number of exposures Compensation value
Two –1.0 EV
Three –1.5 EV
Four –2.0 EV
Eight or Nine –3.0 EV
• Test shooting is recommended since the compensation actually required
varies depending on the shooting situation.
• When the background is completely dark and subjects do not overlap, no
compensation is necessary for each shot.
• In some cases, frames may shift slightly in multiple exposure. In particular,
film advance/rewind becomes unstable at the beginning and near the end
of a film roll so multiple exposure is not recommended.
• Multiple exposure consists of two or more exposures of one or more
subjects in the same frame. Multiple exposure can be performed in any
of the available exposure modes.
1 Rotate and set the film advance mode selector to Z
while pressing the film advance mode selector lock
release.
3 Compose picture, confirm focus indicator / and
shoot.
• The first shot is taken when the shutter release button is fully depressed.
The film does not advance and multiple exposures can be taken from the
second shutter release.
• The film does not advance and the frame counter does not count up as
long as the film advance mode selector is set to Z.
• To cancel multiple exposure, set the film advance mode selector to a
position other than Z. Film is advanced when the exposure meter is on
and the shutter release button is lightly pressed. When the film is
advanced, frame counter counts up.
· 14 : The film advance mode in multiple exposure is normally set to single-
frame shooting. However, it can be set to continuous shooting (page 73).
P500 (E) 02.12.27 5:48 PM Page 60
WWW.LENSINC.NET