Yealink SIP-T46G User Manual
Page 74
User Guide for the SIP-T46G IP Phone
64
1. Press the DSS key to accept the incoming call.
2. Press the DSS key to place the active call on hold.
3. Press the DSS key again to resume the held call.
If you select Lock from the Value field, the line keys located in the same position of the
other page will be automatically assigned Line feature with Lock filled in the Value field.
Then you can use this key on every page. This feature is only applicable to line key 1-9.
If you select Float from the Value field, the phone will automatically switch to the page
the line key located, when the line key receives an incoming call.
Speed Dial
You can use this key feature to speed up dialing the numbers often used or hard to
remember.
Dependencies:
Type (Speed Dial)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the number you want to dial out)
Usage: Press the DSS key to dial out the number specified in the Value field, using the
account selected from the Account ID field.
Voice Mail
You can use this key feature to connect voice mail quickly. For more information, refer to
Dependencies:
Type (Key Event)
Key Event (Voice Mail)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the voice mail access code)
Usage: Press the DSS key to dial out the voice mail access code, you can follow the
voice prompt to listen to the voice mails.
Directed Pickup
You can use this key feature to answer someone else’s incoming call on the phone.
Dependencies:
Type (Key Event)
Key Event (Directed Pickup)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the directed pickup code followed by the specific phone
number)
Usage: Press the DSS key on your phone when the specific phone number receives an
incoming call. The call is answered on your phone.