Basic network settings – Yealink SIP-T46G User Manual

Page 25

Text mode
Original mode

Getting Started

The phone status is displayed on the first page of the web user interface.

If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.

To configure the IP address mode via phone user interface:

1. Press Menu->Advanced (password: admin) ->Network->WAN Port.

2. Press or , or the Switch soft key to select IPv4, IPv6 or IPv4 & IPv6 from the IP

Address Mode field.

3. Press the Save soft key to accept the change or the Back soft key to cancel.