Yealink SIP-T46G User Manual
Page 116
User Guide for the SIP-T46G IP Phone
106
Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1. Press or the Transfer soft key during a call.
2. Do one of the following:
-
Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to
for more information).
-
Press the Directory soft key, and then select Local Calllog. Select the desired
list and press or to select the entry (Directory should be configured in
advance. Refer to
-
Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to
on page
and
on page
for
more information).
3. Press or to dial out.
4. Press or the Transfer soft key to complete the transfer when receiving
ringback.
To perform an attended transfer:
1. Press or the Transfer soft key during a call.
2. Do one of the following:
-
Enter the number you want to transfer the call to.
-
Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to
-
Press the Directory soft key, and then select Local Calllog. Select the desired
list and press or to select the entry (Directory should be configured in
advance. Refer to
-
Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory should be configured in
advance. Refer to
and
for more information).
3. Press or to dial out.
4. After the party answers the call, press or the Transfer soft key to complete the
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.