Yealink SIP-T28P - Manual (Page 132)

User Guide for the SIP-T28P IP Phone
120
the voice call in progress takes precedence over all incoming multicast paging calls.
Valid values in the Paging Barge field:

1 to 10: Define the priority of the active call, 1 is the highest priority, 10 is the lowest.

Disabled: The voice call in progress shall take precedence over all incoming paging
calls.
Paging Priority Active
Paging priority active parameter decides how the phone handles incoming multicast
paging calls when there is already a multicast paging call on the phone. If enabled, the
phone will ignore incoming multicast paging calls with lower priorities, otherwise, the
phone will answer incoming multicast paging calls automatically and place the
previous multicast paging call on hold. If disabled, the phone will automatically ignore
all incoming multicast paging calls.
To configure multicast listening addresses via web user interface:
1. Click on Directory->Multicast IP.
2. Select the desired value from the pull-down list of Paging Barge.
3. Select the desired value from the pull-down list of Paging Priority Active.
4. Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:10008) which
the phone listens for incoming RTP multicast in the Listening Address field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
5. Enter the label in the Label field.
Label will appear on the LCD screen when receiving the RTP multicast.