Cooper Instruments & Systems Series M7 Professional Digital Force Gauge - Manual (Page 38)

Series 7 Digital Force Gauges User’s Guide
37
18.2 Factory Default Settings
Parameter Setting
Set points
Upper Disabled (defaults to 80% of full scale, compression, when enabled)
Lower Disabled (defaults to 40% of full scale, compression, when enabled)
Filters
Current
16
Displayed 2048
Average mode Disabled
Initial Delay 0
Trigger Force 10% of full scale
Averaging Time (sec.) 5.0
Auto Output Settings All disabled
Auto Zero Delay 5 sec.
External Trigger Disabled
Auto Output Settings All disabled
Auto Zero Delay 5 sec.
DATA Key Functions
RS-232/USB Output Enabled
Mitutoyo Output Disabled
Memory Storage Enabled
Auto Zero Disabled
Auto Zero Delay 5 sec.
Serial/USB
RS-232 Output Selected
Enabled
USB Output Selected Disabled
Baud Rate 9,600
Data Format Numeric + Units
Auto Output Disabled
Outputs per Sec. 125
Mitutoyo BCD Output Disabled
Break Detection Disabled
Threshold 10% of full scale
% Drop 50% of peak
Auto Zero Delay 5 sec.
Auto Output Settings All disabled
Auto Storage Disabled
Auto Zero Disabled
First, Second Peak Disabled
Thresholds 10%
% Drops 50%
Auto Zero Delay 5 sec.
Auto Output Settings All disabled
Auto Store Peaks Disabled
Data Capture Disabled
Period 00:00:01:00000
Start Condition Start force of 10% of full scale
Stop Condition Stop force or 20% of full scale
Auto Settings All disable
Footswitch Disabled
Steps 1 / 2 / 3
None
Delays 1 / 2 / 3 0 sec.
COF Disabled
Sled Weight 20% of full scale
Custom Unit Disabled
Base Unit lbF
Multiplier 1.000
Tones