Cooper Instruments & Systems Series M7 Professional Digital Force Gauge User Manual

Page 33

Series 7 Digital Force Gauges

User’s Guide

14. Any errors are reported by the following screens:

Displayed at the start of calibration if a disallowed unit is selected.

Ensure that the load is not swinging, oscillating, or vibrating in any manner. Then try again.

The calibration weight does not match the set value.

The entered calibration point is too close to the previous point.

CALIBRATION

TENSION

Load too close

to previous.

Please try again.

CALIBRATION

Load not stable.

Please try again.

CALIBRATION

Units must be gF.

Please try again

Press ENTER.

CALIBRATION

COMPRESSION

Load too low.

Please try again.