Cooper Instruments & Systems Series M7 Professional Digital Force Gauge User Manual
Page 37

Series 7 Digital Force Gauges
User’s Guide
36
17.6 Restore Default Settings
Default factory settings can be restored by selecting Restore Defaults from the menu. The settings may
be found in the Specifications section. The screen appears as follows:
17.7 Information / Welcome Screen
The following screen is displayed at power-up and can be accessed at any time by selecting Information
from the menu:
18 SPECIFICATIONS
18.1 General
Accuracy:
±0.1% of full scale
Sampling rate:
14,000 Hz
Power:
AC or rechargeable battery. Low battery indicator appears when battery level is low, and
gauge powers off automatically when power reaches critical stage.
Battery life:
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units:
lbF, ozF, gF, kgF, N, kN, mN, COF (depending on model)
Outputs:
USB / RS-232: Fully configurable up to 115,200 baud. Includes GCL2 (Gauge Control
Language 2) for full computer control.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VCD, ±0.25% of full scale at capacity,
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Safe overload:
150% of full scale (display shows “OVER” at 110% and above)
Weight (gauge only):
M7-012 – M7-100: 1.0 lb [0.45 kg]
M7-200 – M7-500: 1.2 lb [0.54 kg]
Included accessories:
Carrying case, chisel, cone, V-groove, hook, flat, extension rod, thread adapter (M5-1000
only), AC adapter, battery, USB cable, resource CD (USB driver, MESUR Lite software,
MESURgauge DEMO software, and user’s guide), NIST-traceable certificate of calibration
with data
Environmental
requirements:
40 - 100°F, max. 96% humidity, non-condensating
Warranty:
3 years (see individual statement for further details)
RESTORE DEFAULT
SETTINGS?
No
Yes
Digital Force Gauge
Series 7
Model No: M7-50
Serial No: 1234567
Version: 1.0
(c) Mark-10 Corp.