Cooper Instruments & Systems Series M4 Digital Force Gage User Manual
Page 13
CF 182
10
32-1117 1010
Windows 7 Operating Systems – When the USB device has been plugged into a USB port, the
driver will automatically be found. When the driver installation is complete, a message will appear as
follows: “The MARK-10 USB DEVICE driver is now installed and ready to use”.
Non-Windows 7 Operating Systems – When the USB device has been plugged into a USB port,
the following screen appears:
12
Select “No, not this time”, then click “Next”.
6. The next screen appears as follows:
Select “Install the software automatically (Recommended)”, then click “Next”.
7. The next screen appears as follows: