Bio-Rad Profinity eXact™ Purification and Tag Cleavage Consumables - Manual (Page 9)

4.3 FPLC Systems
The luer to M6 adaptor fittings kit (catalog #732-0111)
provides fittings necessary to connect the Bio-Scale
Mini cartridge to the M6 fittings found on FPLC or
related systems. Alternatively, connection can be
made by using one GE Healthcare Union luerlock
female to M6 female fitting (GE 18-1027-12) and
one Upchurch P-686, female slip luer to male M6
fitting or GE 18-1027-62, Union luerlock female to
M6 male fitting. To prevent tubing or cartridge failure,
do not exceed the maximum recommended flow
rate of the cartridge.
* Fittings kit ordering information can be found within
the Ordering Information section of this manual.
13
Fig. 4. Luer to 1/4-28 adaptor.
4.2 HPLC Systems
The luer to 10-32 adaptor fittings kit (catalog
#732-0112) provides fittings necessary to connect
the Bio-Scale Mini cartridge to nut and ferrule type
fittings found on most HPLC systems. Alternatively,
the cartridge can be connected to HPLC systems
via a low dead-volume 1/16 inch union with a new
piece of stainless-steel tubing attached to the
union. Simply slip a short length of the 0.8 mm ID
tubing over the 1/16 inch OD stainless-steel tubing
to a distance of 1 cm.
12
10011164A.qxp 11/19/2007 9:54 AM Page 12