Bio-Rad Bio-Scale™ Mini Bio-Gel® P-6 Desalting Cartridges - Manual (Page 10)

2. To apply samples efficiently, install 1.6 mm ID
tubing from the pump to the MV-6 sample
inject valve (if available). If using the MV-6
sample inject valve, turn the knob
counterclockwise as far as it will go so it will
now correspond to the printed diagram on the
valve (see Figure 2).
Fig. 2. Connecting to an MV-6 valve.
TO
COLUMN
TO
BIOLOGIC LP
SYSTEM OR ECONO
GRADIENT PUMP
TO
BIOLOGIC LP
SYSTEM OR ECONO
GRADIENT PUMP
MV-6
INJECT
VALVE
SAMPLE LOOP
WASTE
INJECT
PORT
FILL
TO
COLUMN
MV-6
INJECT
VALVE
SAMPLE LOOP
WASTE
INJECT
PORT
FILL
"INJECT" POSITION "FILL" POSITION
6
10006995B.qxp 6/13/2007 9:00 AM Page 6