Bio-Rad UNOsphere™ Rapid S Media - Manual (Page 11)

2. To maximize gradient accuracy and apply
samples efficiently, install 1.6 mm ID tubing from
the pump to the MV-6 sample inject valve (if
available). If using the MV-6 sample inject valve,
turn the knob counterclockwise as far as it will
go so it will now correspond to the printed
diagram on the valve. (See Figure 2.)
Fig. 2. Connecting to a MV-6 valve.
TO
COLUMN
TO
BIOLOGIC LP
SYSTEM OR ECONO
GRADIENT PUMP
TO
BIOLOGIC LP
SYSTEM OR ECONO
GRADIENT PUMP
MV-6
INJECT
VALVE
SAMPLE LOOP
WASTE
INJECT
PORT
FILL
TO
COLUMN
MV-6
INJECT
VALVE
SAMPLE LOOP
WASTE
INJECT
PORT
FILL
"INJECT" POSITION "FILL" POSITION
7
10005454D:10005454A.qxd 9/24/2008 10:00 AM Page 7