Bio-Rad Human MMP and TIMP Assays - Manual (Page 7)

5
Item
Bio-Plex Pro Inflammation Assays Quick Guide
Bio-Plex ® MAGPIX ™ , Bio-Plex Manager ™
Bio-Plex validation kit
Note: Run the validation kit monthly to ensure optimal
performance of fluidics and optics systems
Bio-Plex calibration kit
Note: Run the calibration kit daily to standardize
fluorescence signal
Bio-Plex Pro wash station
For use with magnetic bead–based assays only
Bio-Plex handheld magnetic washer
For use with magnetic bead–based assays only
Bio-Plex Pro flat bottom plates (40 x 96-well)
For magnetic separation on the Bio-Plex Pro wash station
Titertube ® micro test tubes
For preparing replicate standards, samples, and controls
prior to loading the plate
Microtiter plate shaker
IKA MTS 2/4 shaker for 2 or 4 microplates
or
Barnstead/Lab-Line Model 4625 plate
shaker (or equivalent capable of 300–1,100 rpm)
BR-2000 vortexer
Reagent reservoirs, 25 ml
For capture beads and detection antibodies
Reagent reservoir, 50 ml (for reagents and buffers)
Pall Life Science Acrodisc: 25 mm PF syringe filter
(0.8/0.2 µm Supor membrane)
Ordering Information
Bulletin #10044281 (download
at www.bio-rad.com/bio-plex)
Bio-Rad catalog #171-015001
Bio-Rad catalog #171-203001
Bio-Rad catalog #171-203060
Bio-Rad catalog #300-34376
Bio-Rad catalog #170-20100
Bio-Rad catalog #171-025001
Bio-Rad catalog #223-9390
IKA catalog #320-8000
VWR catalog #57019-600
Bio-Rad catalog #166-0610
VistaLab catalog #3054-1002
or
VistaLab catalog #3054-1004
VistaLab catalog #3054-1006
Pall Life Sciences
catalog #4187
Other: 5 or 15 ml polypropylene tubes for reagent dilutions, calibrated pipets, pipet tips, sterile
distilled water, aluminum foil, absorbent paper towels, 1.5 or 2 ml microcentrifuge tubes, and
standard flat bottom microplate (for calibrating vacuum manifold).
Table 2. Recommended materials.