Bio-Rad PowerPac™ Universal Power Supply - Manual (Page 13)

Step Procedure Description
9. Transmit Method Press Beam to transmit the method to the
PowerPac Universal or PowerPac HV power
supply.
Note: If the receiving PowerPac power
supply memory already contains nine methods,
the new method will be transmitted to flash
memory so it can be run, but it will not be
saved to the method list of the PowerPac.
The PowerPac remote software maintains
three separate method lists:
1) PowerPac Universal methods
2) PowerPac HV Basic and IEF Methods
3.6 Receiving and Transmitting Data
Step Procedure Description
1. Start the software Start the PowerPac remote software on the
PDA and press Run Data from the main
screen.
2. Receive data from PowerPac HV or Universal.
Run Data—drop down menu displays the
stored run data files
Purge Data—deleted all run data files stored
on the PDA. A popup message asks for delete
confirmation
Get Data From PowerPac—click to transmit
the data file from the PowerPac to the PDA
Note: PowerPac power supplies have the run
data file of the last run in the temporary
memory. This data file is deleted as soon as a
new run is started or the PowerPac is turned
off
Done—returns to the startup screen
3. Transmit run data files from PowerPac to PDA
Click Get Data From PowerPac to
transmit the data file from the PowerPac
to the PDA.
The screen will display the Searching
message and a subsequent Data
Received message.
Get Data from PowerPac—transmits data
file to a PC.
Delete—deletes the currently selected data
file
10
Run Data
Collected Run Data
Done
Purge Data
Get Data From PowerPac