Bio-Rad PowerPac™ Universal Power Supply - Manual (Page 10)

3.5 Creating, Editing, and Transmitting Methods with a PDA
The general steps are the same for creating or editing methods for both the
PowerPac Universal and PowerPac HV. The variable parameters will change
according to the method and power supply. To learn more about the parameters,
refer to the power supply's instruction manual.
Step Procedure Description
1 Start the software·
•
Click the PowerPac icon on the PDA to
begin.
2. Select power supply PowerPac Remote software main screen
Start the PowerPac remote software and
select the Universal or HV methods.
3. Open a method There are three ways to access a method:
a.
Press New Method to create and open a
new method.
b. Select an existing method from the
drop-down method list and press Edit.
Note: the Edit and Beam buttons appear
only if a method from the method list has
been selected.
c. Press Beam Current Method In to
retrieve a method from the PowerPac
and store it in the method list. Note: the
method in the PowerPac must be
opened before transmission.
Other Buttons
Purge Methods—used to delete all methods
stored on the PDA
Beam—transmits the currently selected
method to the PowerPac power supply
Done—returns to the startup screen
7
Existing Methods
Done Beam Current Method In
Edit
Beam
Sample
New Method Purge Methods