Baseline Systems BaseManager 2.0 - Manual (Page 9)

BaseManager 2.0 Quick Start Guide
BaseStation 1000
The PIN displays in a message, but after the message is
dismissed from the display, you can find the PIN on
the BaseManager Info screen.
1. Press the System Setup button.
2. Press the  button to highlight the Network
Setup option, and then press OK.
3. Press the  button to highlight the
BaseManager Info option, and then press OK. The PIN displays on the last line as shown in
the illustration.
4. Write down the PIN found in the Reg. PIN field
on this screen.
5. Write down the MAC address of the BaseStation
1000 controller found in the MAC field on this
screen.
BaseStation 3200
The PIN briefly displays in a pop-up message as shown
in the illustration. After the message is dismissed from
the display, you can find the PIN on the BaseManager
Address screen.
1. Turn the dial on the BaseStation 3200 controller
to Network.
2. When the BaseManager Server Setup option is
highlighted, press the Enter button to select it.
The BaseManager Address screen displays as
shown in the lower illustration.
3. Write down the PIN found in the Registration
Code field on this screen.
4. Write down the MAC address of the BaseStation
3200 controller found in the Physical (MAC)
Address field on this screen.
Page 5