Amico Mira LED - Manual (Page 6)

6 Amico Lighting Solutions
Safety Instructions
Specific fitting instructions
Mira LED Ceiling Mount
• Mounting material not included in delivery.
• The ceiling mount may be fitted to ceiling only with a concrete strength of B25 (C20/25) or greater.
• Contact with reinforcing elements of the solid slab ceiling must be avoided. In case of doubt, a licensed fitter
should control the mounting on the respective surface.
• The drill holes should be made by a skilled person in accordance with the drill hole tolerances recommended
by the manufacturer of the fastening anchors.
• The screws must be carefully tightened using a torque wrench in accordance with the recommendations oft
he manufacturer oft he fastening anchors.
Mira LED Wall Mount
• Mounting material not included in delivery.
The light may be mounted only on walls that guarantee sufficient hold. The necessary technical information can be
found in the Installation section of this manual.
Warning levels
WARNING
Warnings against hazards that may result in serious injuries or death in case of non-observance.
CAUTION
Warnings against hazards that may result in injuries in case of non-observance.
NOTICE
Warnings against hazards that may result in material damage in case of non-observance.